5 inch LCD 800*480 Resistive Touch Screen Display HDMI interface drivers provided For Raspberry pi3B+/3/2 B/B+/A

36,77 (actualizado a 25 marzo, 2019, 15:00) IVA Incluido

Normalmente se despacha en 24 horas

For Raspberry Pi 2 / 3 Model B / A ,resistive touch control,drivers provided , works directly with Raspbian/Ubuntu
Display with HDMI interface, no I/Os required (however, the touch panel still needs I/Os)
Direct-connect with any revision of Raspberry Pi ,but when connect with the Pi 1 model B or Pi Zero, it needs an HDMI cable.

Categoría:

Descripción

Description
1. For Raspberry Pi 2 / 3 Model B+/B / A ,resistive touch prueba,drivers provided , works directly with Raspbian/Ubuntu
2. Display with HDMI interface, no I/Os required (however, the touch cartel still needs I/Os)
3. Direct-connect with any revision of Raspberry Pi ,but when connect with the Pi 1 model B or Pi Zero, it needs an HDMI cabo.
4. Backlight can be turned off to lower power consumption
5. Strongly recommended to use a stand-alone 5V/2A power adapter
FAQ
1. Why the LCD doesn’t work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user pauta.
However, for the first testing, you may want to use our provided image directly.
2. Why the LCD still doesn’t work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
3. Which power supply should I use?
It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC’s USB port might have not enough power to support the Pi and LCD.
Package Contain
5inch HDMI LCD x 1
HDMI connector x 1
Touch pen x 1
RPi screws pack (4pcs) x 1

For Raspberry Pi 2 / 3 Model B / A ,resistive touch prueba,drivers provided , works directly with Raspbian/Ubuntu
Display with HDMI interface, no I/Os required (however, the touch cartel still needs I/Os)
Direct-connect with any revision of Raspberry Pi ,but when connect with the Pi 1 model B or Pi Zero, it needs an HDMI cabo.
Only could use with Raspberry Pi, could not used for PC; Backlight can be turned off to lower power consumption
Strongly recommended to use a stand-alone 5V/2A power adapter;This display don’t support to work with PC and windows, if you want to connect with PC, choose the “5+inches lcd B”

Información adicional

Binding

Brand

EAN

EAN List

Label

Manufacturer

MPN

Package Dimensions

Package Quantity

Part Number

Product Group

Product Type Name

Publisher

Size

Studio

UPC

UPC List

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “5 inch LCD 800*480 Resistive Touch Screen Display HDMI interface drivers provided For Raspberry pi3B+/3/2 B/B+/A”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

Menu

Categorías del producto

Suscribete a nuestro Boletín con las ultimas novedades